Produktai skirti 32 amp izoliatorius (13)

Die Rudolf Kiesewetter Messtechnik GmbH sowie ihre Produkte genießen national sowie international hohe Beachtung. Erklärtes Ziel ist es, Ihnen als Kunden innovative Produkte anzubieten. Dabei sind wir bestrebt, die Produktpalette stetig zu erweitern und auf dem neuesten Stand der Technik anzubieten.

Product Features: • Primary 115VAC, 60 Hz., Secondary 115VAC. • Electrostatic shield between primary and secondary. • Connection by flexible leads, 8" minimum length. • Perfect for circuit isolation or "Classic" bias power supply. • CSA certified (209651).

Allgemeines: Gehäuse aus hochwertigem Butylkautschuk (Vollgummi), hohe mechanische Festigkeit, unzerbrechlich, beständig gegen Öle, Fette, Säuren und Laugen

Product Features: • Used (with 150 Volt full scale A.C. voltmeters) to measure the voltage of 240, 480 or 600 VAC systems. • Primary insulated for 4.0 KV rms test, suitable for L.V. switchgear and motor control use. • 50/60 Hz. operation. • Open construction - "Type H". • CSA certified (209651). • The nominal line voltages of 240 and 480 volts may be exceeded by 25% for 60 Hz. operation. • Insulation system 55°C rise, Class 105.

Product Features: Primary 120VCA, 50/60 Hz., Secondary 240VAC. Provided circuit isolation. • Torodial transformer for high isolation, low noise, light weight cool operation and low profile. • 50 or 60 Hz. operation, step up (120VAC to 240VAC). • Standard 3-wire, grounded plug (can also be used with adaptors for proper grounding). • Input (primary) connected to a 5 foot cord and standard North American plug (NEMA 5-15P). • Output (Secondary) connected to a standard North American duplex - 3 wire grounded receptacle (NEMA 6-15R). • Transformer Hi-Pot test of 4,000V RMS between primary and secondary. • Features include ventilated black steel case with rocker lighted on-off switch and circuit breaker protected output. • North American Mark of Safety - C UL and UL listed (File #E211544). • Indoor use only. • Remember - These units do NOT convert line frequency.

Product Features: • Designed for driver use ONLY in single ended tube output amplifiers. These units replace coupling capacitor circuits for improved sound. • Closed style with minimum 8" long leads. • All models use bifilar wound windings for exceptional coupling and bandwidth. • Minimum frequency response 20 Hz. - 20 Khz (+/- 1 db max. ref. 1 Khz.). • The core is gapped to support the specified D.C. bias current. • Maximum working voltage - 400 VDC. • Units are Hi-Pot tested at 1,000 VDC. • Core uses Hi grade silicone laminations (29M6). • Units weight - 3 lbs. 2 oz.

Product Features: • Primary 230VAC, 50/60 Hz. Secondary 115VAC. • Circuit breaker in primary. • Provides circuit isolation and steps down primary voltage. • Hi-pot tested to 2 KV RMS. • Electrostatic shield between primary and secondary. • Input (Primary) connected to a 5 foot long cord and European (Schuko) grounded plug - note: Old inventory only. • Input - due to U.L. changes in 2007 - New production with the European (Shuko) parts would no longer be U.L. listed. Therefore, we have replaced this input plug with a standard North American 3-wire, 250V plug (NEMA 6-15P). • Output (Secondary) connected to a 1 foot long cord and standard North American 3-wire grounded receptacle (NEMA 5-15R). • North American Mark of Safety - C UL and UL listed (File #E211544). • Indoor use only. • Remember - These units do NOT convert line frequency.

Product Features: • Designed for push-pull tube output circuits. • Units are designed to provide ample "headroom" at bass frequencies (note the weight of each transformer). • All models have a secondary tapped fro 4, 8 or 16 ohm outputs. • Enclosed (Shielded), 4 slot, above chassis Type "X" mounting. • Manufactured with plastic coil forms for coil support and insulation. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. - ref. 1 Khz.) minimum. • Insulated flexible leads 8" min. • All units (except the 1650G) include 40% screen taps for Ultra-Linear operation (if desired). • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. The 1650G does NOT have primary screen taps and will not support "Ultra Linear" applications.

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Designed for drop in replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Material used and design specs. were kept as close as possible to the original part to preserve the stock "tone".

Product Features: • Dual 117/234 VAC primary, 50/60 Hz. operating. • Note: Units are designed to have all windings engaged (either series or parallel connected) or connected as an autotransformer. • Supplied with two neoprene rubber insulating pads, one metal centering washer and all mounting hardware (except the 1,500 VA size). • 1,500 VA size - is supplied with a potted center for extra strength. • Minimum 8" long flexible leads. • Manufactured using Class B (130&de C) materials. • Hi-Pot test of 4,000VAC RMS between primary and secondary. • UL recognized to UL506 (XPTQ2.Guide) UL file #E207860. • CSA certified to C22.2 #66 - CSA file #209651. • CE compliant to IEC 61558-2-4.

Product Features: • Primary 120VAC, 50/60 Hz., Secondary 120VAC. • Provides circuit isolation. • Toroidal transformer for high isolation, low noise, light weight, cool operation and low profile. • World wide applications, 50 or 60 Hz. operation, step down (120VAC to 120VAC). • Standard 3-wire, grounded plug (for use with adaptors for proper grounding). • Input (Primary) connected to a 5 foot long cord and standard North American plug (NEMA 5-15P). • Output (Secondary) connected to two standard - 3 wire grounded receptacles (NEMA 5-15R). • Features include ventilated black steel case, rocker lighted on-off switch and circuit breaker protected output. • North American Mark of Safety - C UL and UL listed (File #E211544). • Indoor use only. • Remember - These units do NOT convert line frequency.

Product Features: • Designed for general purpose or replacement use in push-pull tube output circuits. • Frequency response: 150 Hz. - 15 Khz. (+/- 1 db max. ref. 1 Khz.). • Open style with minimum 10" long primary and secondary leads.